Wear parts and components made from Hardox® tubes and pipes
Abraservice manufactures wear-resistant parts and components using Hardox® tubes and pipes.
The wear-resistant properties of Hardox® tubes and pipes make them ideal for harsh service conditions, where strength, wear performance and long service life are critical.
Common applications include:
- Concrete pump lines
- Ash transfer lines
- Foundry sand transfer systems
- Foundry baskets for shot blasting systems
- Dredging lines for sand and silt transfer
- Structural components exposed to wear on the outside surface
Hardox® is a trademark of the SSAB group of companies.
What makes Hardox tubes and pipes the best material
Hardox® tubes and pipes combine high hardness with impact toughness, making them suitable for applications exposed to abrasive materials and severe wear.
Hardox® round steel tubes have undergone extensive pressure testing. During testing, Hardox® 400 tubes in all dimensions withstood a peak pressure of 60 MPa (8.70 ksi) for at least six hours. In tests of Hardox® 500 tubes, a peak pressure of 85 MPa (12.33 ksi) was achieved.
Sizes and delivery conditions
Hardox® 400 tubes and pipes are available in outer diameters from 76.1 to 219.1 mm, while Hardox® 500 covers 76.1 to 133.0 mm. Wall thicknesses range from 3.0 to 6.0 mm and standard mill length is 6,000 mm. Hardox® tubes and pipes are delivered in quenched condition, except for diameters above 133 mm, which are delivered in as-rolled condition.
Hardox® 400 Tubes and Hardox® 500 Tubes comply with EN 10210 requirements for dimensional tolerances and testing.
Contact us to discuss the right material for your applications, or learn more about Hardox® wear plate.
Downloads: Brochures & Material specifications
Hardox® Tubes & Pipes
Wall thickness: 3.0 - 6.0
Mill length: 6000Circular: 3.00 - 8.630
Wall thickness: 0.118 - 0.236
Mill length: 236.220